[Contents]
[Prev]
[Next]
[Index]
[Report an Error]
show controllers sonet remote
Syntax
show controllers sonet { interfaceSpecifier [ :controllerSpecifier ] remote [ all ] }
[ filter ]
Release Information
Command introduced before JUNOSe Release
7.1.0.
Description
Displays information about the statistics on the
remote device when MDL is configured on a T3 over channelized SONET
interface or FDL is configured on either a T1 channel on a T3 over
channelized SONET interface or a T1 over SONET/SDH interface.
Options
-
interfaceSpecifier—Particular
interface; format varies according to interface type; see Interface Types and Specifiers
-
controllerSpecifier—One of
the following:
- For a section or line, there is no controllerSpecifier
- For a T3 over channelized SONET interface, specified in
the format
pathChannel ds3-channel-number [ ds1-channel-number ]
[ subchannelNumber ]
- For a T1 over SONET/SDH interface, specified in the format
pathChannel [ /pathPayload ] [ /tributaryGroup ] [ /tributaryNumber ]
[ /channelGroup ]
-
pathChannel—Number of the
path
-
pathPayload—Number of the
payload within the path. In SONET mode, pathPayload is always 1. In SDH mode, pathPayload is the
number of the TUG-3 group.
-
tributaryGroup—Number of the
tributary group within the path. In SONET mode, tributary
group is the number of the VT group. In SDH mode, tributary
group is the number of the TUG-2 group.
-
tributaryNumber—Number of
the tributary within the group. In SONET mode, tributaryNumber is the number of the VT. In SDH mode, tributaryNumber is the number of the TUG-1 group or tributary
unit.
-
channelGroup—Number of the
channel group
-
ds3-channel-number—Number
of the ds3 channel
-
ds1-channel-number—Number
of the ds1 channel in the range 1–28
-
subchannelNumber—Number of
the subchannel in the range 1–24
- all—Shows statistics for all time intervals, rather
than statistics for selected time intervals
-
filter—See Filtering show Commands
Privileged Exec, User Exec
[Contents]
[Prev]
[Next]
[Index]
[Report an Error]
